Print Engine
Method: Electrophotographic recording with semiconductor laser. Dry toner, image transfer to paper
Resolution: 300 x 300 dots per inch
Speed:
32 pages per minute
Warm-up Time: Less than 90 seconds
Recommended Duty Cycle:
240,000 prints per month
Controller
Type: Wings Architecture for Intelligent Connectivity
Processors: Texas Instruments 34010 GSP (60 MHz), National Semiconductor 32CG16 (10 MHz), optional Intel i960CA RISC (33 MHz)
Memory: 14 MB RAM
Optional SCSI Hard Drive
Page Description Language: Talaris EXCL (ANSI X3.64 with image processing extensions)
Standard Printer Emulations: TIFF Reader
Optional Printer Emulations: FileNet Reader, HP LaserJet II, HP-GL, LN03 Plus, Tektronix 4014, XES, QUIC, Diablo 630 ECS
Optional PDL: PSI 960 PostScript Interpreter (Level I or Level 2)
Standard Fonts: 45 bitmap fonts
Optional Font Support: PostScript Type 1, PostScript Type 3, and custom bitmap font libraries available
Password Option Licensing: Allows instant access when adding new options
Interfaces
Standard Interfaces: Ethernet (Simultaneous TCP/IP, Novell IPX and DECnet, plus EtherTalk if PSI 960 installed), Centronics Parallel
Optional Interfaces: SCSI, SNA/BSC, Token Ring (External)
Multiplexed I/O: Allows all of printer's interfaces to receive data simultaneously
Paper Handling
Supported Paper Sizes: Letter, half-letter, legal, ledger (B), A3, A4, B4, B5 and executive
Maximum Print Area: 3.5mm from top and left, 4mm from right, and 5mm from bottom
Paper Stock: 16 to 24 lbs. (60 to 90 g/m2) paper in all sizes and approved transparency film
Paper Input: Cut-sheet paper or transparency film from two cassettes (250 sheets each) and 1,000 sheets from large-capacity feeder
Paper Output: Two 750-sheet face-down stackers, 100-sheet face-up stacker
Automatic Jam Recovery: Automatically reprints any page affected by a jam
Automatic Paper Tray/Size Selection
Job Control: Keypanel job abort function
Physical Characteristics
Type: Laser printer with internal controller
Dimensions: 37.4" W x 49.6" H x 25.7" D (95 cm x 126 cm x 65 cm)
Weight: Approximately 345 lbs. (156 kg)
Electrical and Environmental Requirements
Power Requirements: 115V, 60 Hz or 220V, 50Hz
Power Consumption: 1400 watts maximum
Temperature: 50° to 90° F (10° to 32° C)
Humidity: 20% to 80% RH
Noise Level: Less than 57 dBa
Warranty
90 days return to factory. On-site installation and warranty service optional.
Service
Available world-wide
|
