Print Engine
Method: Electrophotographic recording with semiconductor laser. Microfine toner, image transfer to paper
Resolution: 300 x 300 dots per inch
Speed: 17 pages per minute
Warm-up Time: Less than 90 seconds
Recommended Duty Cycle: 50,000 prints per month
Controller
Type: Wings Architecture for Intelligent Connectivity
Processors: Texas Instruments 34010 GSP (60 MHz), National Semiconductor 32CG16 (10 MHz), optional Intel i960CA RISC (33 MHz) for PostScript rasterization
Memory: 10 MB RAM (standard), 14 MB (with duplex option installed)
Optional SCSI Hard Drive
Page Description Language: Talaris EXCL (ANSI X3.64 with image processing extensions)
Standard Printer Emulations: TIFF Reader
Optional Printer Emulations: FileNet Reader, HP LaserJet II, HP-GL, LN03 Plus, Tektronix 4014, XES, QUIC, Diablo 630 ECS
Optional PDL: PSI 960 PostScript Interpreter (Level I or Level 2)
Standard Fonts: 82 bitmap fonts
Optional Font Support: PostScript Type 1, PostScript Type 3, and custom bitmap font libraries available
Password Option Licensing: Allows instant access when adding new options
Interfaces
Standard Interfaces: Ethernet (Simultaneous TCP/IP, Novell IPX and DECnet, plus EtherTalk if PSI 960 installed), Centronics Parallel, SCSI
Optional Interfaces: SNA/BSC, Token Ring (External)
Multiplexed I/O: Allows all of printer's interfaces to receive data simultaneously
Paper Handling
Supported Paper Sizes: Letter, legal, A4 and executive
Maximum Print Area: 3.5mm from top and left, 4mm from right, and 5mm from bottom
Paper Stock: 16 to 24 lbs. (60 to 90 g/m2) paper in all sizes and approved transparency film
Paper Input: Cut-sheet paper or transparency film from two cassettes (500 sheets each) and manual feed
Paper Output: 500 sheets in face-down stacker, 50 sheets in face-up stacker
Automatic Jam Recovery: Automatically reprints any page affected by a jam
Automatic Paper Tray/Size Selection
Job Control: Keypanel job abort function
Optional Duplexing Unit
Optional Power Envelope Feeder
Physical Characteristics
Type: Laser printer with internal controller
Dimensions: 21.6" W x 19" H x 22.4" D (55 cm x 48 cm x 57 cm)
Weight: 99 lbs. (45 kg)
Electrical and Environmental Requirements
Power Requirements: 115V, 60 Hz or 220V, 50Hz
Power Consumption: 500 watts maximum
Operating Temperature: 50° to 90° F (10° to 32° C)
Storage Temperature: -40° to 109° F (-20° to 43° C)
Humidity: 20% to 80% RH (operating)
Noise Level: Less than 55 dBa
Warranty
One year return to factory
Service
Available world-wide
|
